Made of high tensile 14-gauge steel, Action's Tear Drop ALL-WELDED Uprights deliver maximum muscle. Action's
Series 1 Regular Duty Uprights have a capacity of 16,000 pounds, are 3"w x 1 5/8"d with two hole 5" x 7" footplates and are available in 96", 120" and 144" sizes.
Series 1 Uprights have product numbers starting with "I-".
Action's
Series 3 Heavy Duty Uprights have a capacity of 24,000 pounds, are 3"w x 3"d with two hole 5"x 7" footplates and are available in 120", 144", 180" and 192" sizes.
Series 3 Uprights have product numbers starting with "I3-".
Each free standing pallet rack unit requires two uprights. Uprights may be used as a single end component or between two bays. Upright face is punched every 2”. Capacities listed are based on non-seismic installation and may be reduced depending on load beam configuration. Color: Green.
Action's popular Tear Drop Design is interchangeable with the following pallet rack manufacturers: Interlake (Original Style), Space Rack, USP, Speed Rack, Lodi Metal-Tech, Steel King, Husky and Ridg-U-Rak.
ORDERING INFORMATION
Uprights: To determine upright depth, allow 3" to 4" pallet overhang both in the front and rear. For example, a 48" deep pallet would require a 42" deep upright. To determine the proper height, allow 4" to 8" clearance between pallet load and beam. Use the following formula to determine Upright Height: Upright Height = pallet heights (including floor pallet) + clearance heights + height of load beam. Loads on top level are not included when determining upright height.
Load Beams: Allow a minimum of 3" clearance between pallet(s) and uprights. For example, two 48" wide pallets would require 108" long load beams.
*Capacities based on two pallets per level. Addition of a third pallet reduces capacity by 50%.